Bel ons 7 dagen per week

020 547 06 06
8:00 - 17:30
Cisco G.SHDSL High Speed WAN interface Card - DSL-modem

Cisco G.SHDSL High Speed WAN interface Card - DSL-modem

Item#: 946897  |  Model#:  HWIC-4SHDSL-E=

Beperkt op voorraad
bel of mail voor de
actuele status Levertijden kunnen varieren door verzendmethode en bestemming.

Bestellingen worden met standaard levering verzonden (voor 16.00 uur besteld en op voorraad? Levering op eerstvolgende werkdag!).

0 Beoordeling | Schrijf een beoordeling

Prijs: € 746,00 Excl. BTW
Prijs: € 902,66 Incl. BTW

Misco raadt aan

The Cisco 4-pair G.SHDSL High Speed WAN Interface Card is designed to deliver high-speed Ethernet services over SHDSL access. HIWC-4SHDSL-E allows bonding to achieve higher data rates as defined by IEEE 802.3ah, and it is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. This card is supported in all Cisco ISR (except the Cisco 3825 and 2811) and ISR G2 routers that have HWIC slots.
The HWIC-4SHDSL-E cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth at rates up to 4 x 5.696 Mbps.
The HWIC-4SHDSL-E together with Cisco ISRs provides businesses the necessary bandwidth for critical traffic such as voice and video conferencing, and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through service-level agreements (SLAs).
This Interface Card enables point-to-point Ethernet connectivity, which uses existing infrastructure of copper wires spanning a typical carrier service area (CSA) of 9,000 to 12,000 feet from a central office to the customer premises.


  • Complies with standard based on ITU Recommendation G.991.2
  • Supports EFM bonding; supports up to four SHDSL pairs bonding
  • Supports dying gasp
  • Supports point-to-point configuration
  • Supports 802.1Q, QinQ, trunk, and VLAN tagging
  • Support IP quality-of-service (QoS) features, 802.1P, and differentiated services code point (DSCP)
  • Supports EFM (IEEE 802.3ah) operation, administration, and maintenance
  • Provides single RJ-45 connector system requirements


  • Business-class DSL with backup WAN
    The Cisco ISR and ISR G2 routers with the 4-pair G.SHDSL EFM HWIC provide a business-class DSL solution for WAN access along for mission-critical applications. The bonding feature offered on the G.SHDSL EFM HWIC allows service providers to bond two or more pairs of G.SHDSL links to offer differentiated bandwidth based on SLAs.
  • Business-class security
    These platforms can also be optimized for VPNs to allow for secure use of the Internet for communications with the same policies and levels of security and performance as a private network. VPNs provide security through encryption tunneling, and the Cisco routers support hardware-based Triple Data Encryption Standard (3DES) IP Security (IPsec), Advanced Encryption Standard (AES), and Secure Sockets Layer VPN (SSL VPN).

Product specificaties

ProductbeschrijvingCisco G.SHDSL High Speed WAN interface Card - DSL-modem
Type apparaatDSL-modem - HWIC
Max. overdrachtsnelheid5.696 Mbps
Protocol voor digitale signaaltransmissieSHDSL
Protocollen & specificatiesITU G.991.2 (G.shdsl)
Aantal analoge poorten4
Afmetingen (BxDxH)7.1 cm x 10.3 cm x 1.8 cm
Gewicht100 g
Ontworpen voorCisco 1841, 1841 2-pair, 1841 3G, 1841 4-pair, 1841 ADSL2, 1841 T1, 1861, 1861E, 1921, 1921 4-pair, 1921 ADSL2+, 1941, 2801, 2801 2-pair, 2801 4-pair, 2801 V3PN, 2821, 2821 4-pair, 2821 V3PN, 2821C, 2851, 2851 V3PN, 2901, 2911, 2921, 2951, 3825, 3825 V3PN, 3925, 3925E, 3945, 3945E

Gemiddelde klantwaardering: (0 Klantbeoordelingen)

Schrijf uw eigen beoordeling

Wees de eerste en stel een vraag!

Andere klanten bekeken